Perfect is the Enemy of Good: A-20 Part 6

Perfectionism is a disease, not a cure. The A-20 model is coming along just fine, despite my best effort to foul it up.

But first, A brief review of today’s activities. I installed the engines, put on the wheels and the propellers. Then I finished up a lot of little painting tasks–specifically the landing gear and the propellers. Next came those darned vac-formed clear parts, and for the most part they went on without a hitch. Except for the nose. It just didn’t look right to me.

How many times have I heard that as an introduction to something like “so I had to sand the whole model down and start over again.” Unfortunately, I’ve already had a bit of bad luck with a Hellcat, and I don’t have any more “goof up and get away with it” cards. I blow this and my whole blog starts to look way too existential.

So I preceded to paint the frames on the clear parts by taking a brush and painting them. This, I know, is supposed to be a feat of magic. Well–maybe it is. I really paid attention to what I was doing this time, instead of just painting, and I noticed a certain amount of “magic” going on. By that I mean that I had to know, decide and act on about a dozen different things, all at the same time, and not make one bad decision. In other words, I did something that the average beginner is just not going to be able to do.

I could have made a video, or stuck to a more “beginner friendly” technique, such as using strips of decal material painting the color of the frames, but I chose not to do those things. I just went ahead an did what I wanted to do. The blog, in this case, was neglected.

These photos were taken after I “fixed” the nose. At first it seemed like no big deal. I’d just tear off the nose “clear part” and trim it, then reattach. But this turned out to be a bear of a job. I’m still trying to figure out a really, really good way to attach these vac-formed canopies. I’m using PVA at the moment but I’m not sure that’s the best approach.

Anyway, I managed, just barely, to avoid another disaster.

I like the way the nose looks now. It’s not perfect, but it’s good. As we used to say back on the farm after escaping from a rampaging bull.

WHEW!

Brushpainter

Well look, I already told you! I deal with the customers so the engineers don't have to! I have people skills! I am good at dealing with people! Can't you understand that? What is wrong with you people?

comments
  • I’ve found that Gator’s Grip is a pretty good adhesive for this sort of stuff. It dries clear like PVA, but it’s a transparent acrylic and is much tougher.

  • Just wondering why you chosen the vac canopies over the kit canopies? Were they a poor fit? Or is it a general rule for you to always use the vac canopies whenever they are available?

    She looks great by the way. I love the paint job and how it all conforms to the painting. Great stuff. The British roundel, covered over with the sand and then the American star on top is a very nice little detail that you pulled off perfectly too.

  • leave a comment

    This site uses Akismet to reduce spam. Learn how your comment data is processed.

    Create Account



    Log In Your Account